Most wanted fugitive in Canada arrested in Charlottetown, P.E.I.
The most wanted fugitive in Canada was arrested in Charlottetown, P.E.I., Tuesday night.
An ambitious plan to send payloads into space is riding on a 3D-printed rocket.
The rocket scheduled to launch from Florida Wednesday looks a lot like others, but at its base is a subtle giveaway: "Printed in the U.S.A."
It's the largest metal object that has ever been 3D printed, those behind its creation say.
The ship was created by Relativity Space, a California company that wants to revolutionize the way the world's rockets are built. Its creators used huge 3D printers capable of making massive parts, and can print similar rockets -- including the engines – in just 60 days.
"So 85 per cent of the rocket by mass that's sitting on the pad right now is 3D-printed," said Josh Brost, senior vice-president of revenue operations at Relativity Space.
In addition to being the world's first 3D-printed rocket, it's potentially the first rocket to use liquid oxygen and liquid methane propellants, Brost said, describing these as "the propellants of the future for what will be reusable rockets."
Such a ship can come together in a fraction of the time, and at a quarter of the cost, Relativity Space says.
Because the 10-storey-tall rocket is mostly printed, it has 100 times fewer parts, according to its creators. It was designed to carry small sattelites into space for customers like NASA.
Its engines have been tested extensively, but Wednesday's launch will be the first time the company has tried to reach orbit.
"We have the ability to demonstrate a brand new way of manufacturing large aerospace systems that has the potential to make access to space less expensive, more frequent and reliable. And that definitely has positive impacts on people's lives on Earth, and will for years to come," Brost said.
"Things are looking great and the team is feeling good and excited to get the opportunity to test the system in flight."
The company's goals for the first flight include proving that a 3D-printed rocket can survive the conditions, including the first-stage ascent, which Brost describes as "the point of maximum dynamic pressure."
"Making it through that will be the ultimate validation that our 3D-printed structures are up to the task of operating the launch system," he said.
"Lots of firsts on 3D printing and demonstrating the viability of that technology."
The company hopes this project is just the beginning. It's also planning a much bigger and reusable rocket that will be 95 per cent 3D printed, hoping that this vessel will eventually go to Mars.
Hoping to boldly go where no printed object has gone before, those behind the rocket have aptly named its first mission "Good Luck Have Fun."
With files from Reuters and The Associated Press
The most wanted fugitive in Canada was arrested in Charlottetown, P.E.I., Tuesday night.
Conservative Leader Pierre Poilievre says he does not regret calling Prime Minister Justin Trudeau 'wacko,' and now his MPs are renewing calls for the House of Commons Speaker to resign, this time over ordering the Official Opposition leader to leave the chamber.
Harvey Weinstein was back in a New York courtroom Wednesday for his first appearance since an appeals court last week overturned his 2020 rape conviction and ordered a new trial.
The highly contagious norovirus is spreading across Canada, with some symptoms overlapping with other viruses. CTVNews.ca spoke with a health expert to find out how you can tell you have norovirus, the most common form of stomach flu, and what to do if you have it.
Nearly a month after the total solar eclipse, at least 160 cases of eye damage have been reported across the country.
A month after eight Norwegian Cruise Line passengers were stranded in Africa when their ship left without them because they were late getting back, a U.S. couple – ages 84 and 81 – were also left behind by the cruise line in Spain.
Defence Minister Bill Blair says he couldn't convince the Liberal cabinet that Canada's government needed to meet NATO's spending target in its recent defence policy update.
A two-year-old child died after a strong gust of wind sent the bounce house he was in airborne and into a neighbouring lot in central Arizona, the Pinal County Sheriff's Office said.
The investigation continues into a collision that killed two grandparents and their infant grandchild during a high-speed police chase on the wrong way of Highway 401 east of Toronto.
A police officer on Montreal's South Shore anonymously donated a kidney that wound up drastically changing the life of a schoolteacher living on dialysis.
Since 1932, Montreal's Henri Henri has been filled to the brim with every possible kind of hat, from newsboy caps to feathered fedoras.
Police in Oak Bay, B.C., had to close a stretch of road Sunday to help an elephant seal named Emerson get safely back into the water.
Out of more than 9,000 entries from over 2,000 breweries in 50 countries, a handful of B.C. brews landed on the podium at the World Beer Cup this week.
Raneem, 10, lives with a neurological condition and liver disease and needs Cholbam, a medication, for a longer and healthier life.
The lawyer for a residential school survivor leading a proposed class-action defamation lawsuit against the Catholic Church over residential schools says the court action is a last resort.
Mounties in Nanaimo, B.C., say two late-night revellers are lucky their allegedly drunken antics weren't reported to police after security cameras captured the men trying to steal a heavy sign from a downtown business.
A property tax bill is perplexing a small townhouse community in Fergus, Ont.
When identical twin sisters Kim and Michelle Krezonoski were invited to compete against some of the world’s most elite female runners at last week’s Boston Marathon, they were in disbelief.